Invacare Rea Focus 150, Руководство пользователя

Страница: 12 / 56

Rea® Focus™
Backrest mechanical version:
C
1. Release the auto-locked system by pushing on the
backrest canes.
2. Simultaneously pull the control levers B to provides the
same angle on both sides.
3. Release the levers when you reach the desired angle.
Backrest gas struts version:
A
1. Press the lever A and adjust the backrest to the desired
angle.
B
WARNING!
Risk of pinching
– Be careful not to get pinched when reclining
the backrest. Never hold your fingers or any
other body parts in the marked area
B
.
3.9 Adjusting the push handles
A
B
1. Loosen the knob
A
.
2. Adjust the push handle B to the required position.
3. Re-tighten the knob.
4. Repeat the procedure on the opposite side.
C
In order to lock the position of the push handle,
the nearest upper hole
C should be visible, just as
shown on the picture above.
3.10 Armrests
WARNING!
Risk of injury
The side rests are not locked and can be easily
pulled out upwards.
– Do not lift or transfer the wheelchair using the
side rests.
– Do not use the side rests for transportation
when carrying the wheelchair up- or downstairs.
CAUTION!
Risk of pinching
– Keep your fingers away from movable parts
during removing, fitting or adjusting the
armrest.
12 1431580-C