Invacare Rea Focus 150, Руководство пользователя

Страница: 46 / 56

Rea® Focus™
Horizontal location of axle
25–85 mm 25–85 mm
Minimum turning radius
785 mm 785 mm
515 mm (20”) 560 mm (22”) 600 mm (24”) 405 mm (16”)
Width of the
wheels
35 mm (1 3/8”)
25 mm (1”) - 35
mm (1 3/8”)
25 mm (1”) - 35 mm
(1 3/8”)
45 mm (1 3/4”)
Wheel
inclination 0° +/- 1° (Wheelchair without load)
11.1.1 Maximum Weight of Removable Parts
Maximum weight of removable parts
Part:
Maximum weight:
Leg rest angle adjustable with calf pad and footrest 3,2 kg
Armrest 2,0 kg
Rear wheel 600 mm (24”) solid with handrim and spoke guard
2,5 kg
Headrest / Neckrest / Cheek support 1,4 kg
Trunk support 0,8 kg
Backrest cushion 2,0 kg
Seat cushion 1,9 kg
Table tray 3,9 kg
11.2 Tyres
The ideal pressure depends on the tyre type:
The table below is an indication. In case the tyre differs
from the list below, check the side of the tyre, the maximum
pressure is listed there.
Tyre Max. pressure
Pneumatic profiled tyre:
515 mm (20”); 560 mm
(22”);
610 mm (24”) 4.5 bar 450 kPa 65 psi
Pneumatic low profile tyre:
515 mm (20”); 560 mm
(22”);
610 mm (24”) 7.5 bar 750 kPa 110 psi
Solid tyre:
560 mm (22”); 610 mm
(24”)
- - -
Tyre Max. pressure
Solid tyre:
125 mm (5”); 140 mm (5”
1/2);
150 mm (6”); 200 mm (8”)
- - -
Pneumatic tyre:
150 mm (6”); 180 mm (7”);
200 mm (8”) 2.5 bar 250 kPa 36 psi
The compatibility of the tyres listed above depends
on the configuration and/or model of your wheelchair.
The size of the tyre is mentioned on the sidewall of
the tyre. The change of appropriate tyres must be
carried out by a qualified technician.
In case of a tyre puncture consult a suitable workshop
(e.g. bike repair shop, bicycle dealer ...) to have the
tube replaced by a skilled person.
CAUTION!
– The tyres pressure have to be equal in both
wheels to avoid a less driving comfort, to keep
the brakes efficiency and an easy propelling of
the wheelchair.
11.3 Material
Chassis, backrest tubes Aluminium
Plastic parts like brake handles, clothes guards, foot plates,
armpads and parts of most options Thermoplastic (e.g. PA, PP, ABS and PUR) according to
marking on the parts
Upholstery (seat and backrest) Foam (PUR), Fabric Nylon and Polyester, Jemima and Plush
fabric and Multi stretch polyurethane (PU) coated fabric
46 1431580-C