Invacare Rea Focus 150, Руководство пользователя

Страница: 6 / 56

Rea® Focus™
CAUTION!
Risk of injury
When combining the wheelchair with another
device, the restrictions of both devices apply for
the combination. E.g. the maximum user weight
of the device may be lower.
– Only use combinations with other devices
which are allowed by Invacare. Contact your
authorized provider for more information.
– Before use, read the user manual of each
device and check the restrictions.
2.2 Safety Devices
WARNING!
Risk of accidents
Safety devices that are incorrectly set or no longer
working (brakes, anti-tipper) can cause accidents.
– Always check that the safety devices are
working before you use the wheelchair and
have them checked regularly by a qualified
technician or your authorized provider.
CAUTION!
Risk of Injury
Non-original or wrong parts may affect the
function and safety of the product.
– Only use original parts for the product in use.
– Due to regional differences, refer to your
local Invacare catalog or website for available
options or contact your Invacare distributor.
See addresses at the end of this document.
The functions of the safety devices are described in chapter
3 Product Overview, page 7 .
2.3 Labels and symbols on the product
Identification label
The identification label is attached to the frame of your
wheelchair and gives the following information:
A
Manufacturer’s address
B Date of manufacture
C Product description
D
Seat width
E Reference number
F
Serial number
G
Medical device
H
Serial number barcode
I EAN/HMI barcode
J Maximum user weight
L
European conformity
Read user manual
Indicates a hazardous situation that could
result in serious injury or death if it is not
avoided.
Non-locking side parts warning label
Do not lift the wheelchair by non-locking
side parts.
Posture belt information label
The posture belt has the good length, when
there’s just sufficient space for a flat hand
between body and belt.
Snap hook symbols
Depending on the configuration, some wheelchairs may be
used as a seat in a motor vehicle, some may not.
ISO 717 6-19
Tie-down positions where the restraint
system straps must be placed in case of
transporting the occupied wheelchair in a
motor vehicle. This symbol is only attached
to the wheelchair when it is ordered with the
transportation kit option.
WARNING Symbol
This wheelchair is not configured for
passenger transport in a motor vehicle. This
symbol is attached to the frame close to the
identification label.
6 1431580-C