Invacare orion pro, Руководство пользователя

Страница: 59 / 72

Troubleshooting
Flash code Fault
Consequence for the
scooter
Comments
5
Brake failure Stops driving • Ensure that the disengaging lever is in the engaged
position.
• There is a defect in the braking coil or in the cabling.
Check the magnetic brake and cabling for open
or short-circuited circuitry. Contact your Invacare
provider.
No neutral position when
switching scooter on. Stops driving • Drive lever is not in neutral when the keyswitch was
turned. Put the drive lever in neutral, turn the power
off and then turn on again.
• It may be necessary to replace the drive lever. Contact
your Invacare provider.
6
Circuit board failure Stops driving • Circuit board got damaged while connecting or
disconnecting the charger to the charger socket.
• Test resistance of drive lever to eliminate a defective
lever.
• It may be necessary to replace the circuit board or
drive lever. Contact your Invacare provider.
7
Fault in speed
potentiometer Stops driving • The drive lever controls could be faulty or
incorrectly connected. Check the cabling for open or
short-circuited circuitry.
• Potentiometer is not correctly adjusted and must be
replaced. Contact your Invacare provider.
8 Motor voltage error Stops driving • The motor or its cabling is defective. Check the cabling
for open or short-circuited circuitry.
1603456-D 59