Invacare orion pro, Руководство пользователя

Страница: 38 / 72

Invacare® Orion Series
The motors may only be disengaged by an attendant,
not by the user.
This ensures that the motors are only disengaged
if an attendant is available to secure the mobility
device and prevent unintended rolling.
The lever for engaging and disengaging the motor is located
on the right-hand side at the rear.
Disengaging Drive
1. Turn off scooter (keyswitch).
2. Press unlocking knob
A
on disengaging lever.
3. Push disengaging lever forwards.
The drive is disengaged. The scooter can be pushed
by hand now.
Engaging Drive
1. Pull lever to rear.
The drive is engaged.
6.8 Driving the scooter
WARNING!
Risk of injury from the unintended rolling of
the vehicle
When stopping the vehicle, the drive lever needs
to return entirely to the middle position to
activate the electromagnetic brakes. If there is
any obstruction stopping the lever from returning
to the middle position, the electromagnetic
brakes cannot be activated. This can lead to the
vehicle rolling unintentionally.
– Ensure that the drive lever is in the middle
position, if the vehicle is to remain stationary.
1. Switch the power supply on (keyswitch).
The operating console display illuminates. The scooter
is ready to drive.
If the scooter is not ready to drive after switching
on, check the status display (refer to
3.3 Operating
console (LCD version), page 22 and 11.1 Diagnosis
and Fault Repair, page 57 ).
2. Set the required speed with the speed controller.
3. Pull the right-hand drive lever carefully to travel
forwards.
4. Pull the left-hand drive lever carefully to travel in
reverse.
The control system is programmed with standard
values in the works. Your Invacare provider can carry
out programming tailored to fit your requirements.
38 1603456-D