Troubleshooting
11 Troubleshooting
11.1 Diagnosis and Fault Repair
The electronic system offers diagnostic information
to support the technician during the recognition and
rectification of faults on the scooter.
The electronic system reacts differently depending on the
seriousness of the fault and its effect on user safety. It can,
for example:
•
Display the error code as a warning and allow both
driving and normal operation to continue.
•
Display the error code, stop the scooter and prevent
further travel until the electronic system has been
switched off and switched on again.
•
Display the error code, stop the scooter and not permit
further travel until the fault has been rectified.
You can find detailed descriptions of individual error codes,
including possible causes and fault repair, in
11.1.2 Error
Codes And Diagnostic Codes, page 58
.
11.1.1 Error diagnosis
If the scooter shows a failure, use the following guide to
locate the fault.
Before making any diagnosis, ensure that the scooter
has been switched on at the keyswitch.
If the status display/LCD display is OFF:
•
Check whether the keyswitch is SWITCHED ON.
•
Check whether all cables are correctly connected.
LED Console
Fig. 11-1
If there is a fault, the status display (1) flashes several times,
pauses, then flashes again. The type of fault is displayed by
the number of flashes which are also known as the "flash
code". Count the number of flashes and proceed to
11.1.2
Error Codes And Diagnostic Codes, page 58
.
LCD Console
Fig. 11-2
If there is a fault, the fault indication symbol
A
, the number
B
and the name of the fault
C
are shown in the LCD display.
Refer to
11.1.2 Error Codes And Diagnostic Codes, page 58
.
1603456-D
57
Содержание orion pro
Страница 70: ...Notes...
Страница 71: ...Notes...
