Invacare MK5 EX Скачать руководство пользователя

Страница: 9 / 40

Part No. 1114822

Tilt/Recline Seating Systems®

TIRE PRESSURE WARNING

The recommended tire pressure is listed on the side wall of each tire.

DO NOT use your wheelchair unless it has the proper tire pressure.

(P.S.I.). DO NOT overinflate the tires. A qualified technician MUST

perform replacement of a pneumatic tire or tube. Failure to follow these

warnings may cause the tire to explode and cause bodily harm.

CAUTION: WEIGHT LIMITATION

Please refer to SPECIFICATIONS to determine the weight limit (total

combined weight of user and any attachments) of your wheelchair model.

Do not exceed the limit - otherwise, injury or damage may result.

WARNING

DO NOT operate the seating system while on an incline.
DO NOT operate the seating system while the wheelchair is moving.
TILT ONLY SYSTEMS - NEVER operate the wheelchair while in any

recline/back angle combination over 20

relative to the VERTICAL POSI-

TION. If the drive lock-out does not stop the wheelchair from operating

in a tilt position 20

relative to the VERTICAL position, DO NOT operate

the wheelchair. Have the wheelchair serviced by a dealer or qualified

technician.
RECLINE ONLY SYSTEMS - NEVER operate the wheelchair while in any

recline/back angle combination over 20

relative to the VERTICAL posi-

tion. If the drive lock-out does not stop the wheelchair from operating in

a tilt/recline/back angle combination 20

relative to the VERTICAL posi-

tion, DO NOT operate the wheelchair. Have the wheelchair serviced by a

dealer or qualified technician.
TILT/RECLINE ONLY SYSTEMS - NEVER operate the wheelchair while

in any tilt/recline/back angle combination over 20° relative to the VERTI-

CAL position. If the drive lock-out does not stop the wheelchair from

operating in a recline/back angle combination 20° relative to the VERTI-

CAL position, DO NOT operate the wheelchair. Have the wheelchair

serviced by a dealer or qualified technician.

Use only TAC, SAC, TRSS and TRCM actuator controls to activate the

tilt/recline functions. DO NOT USE any other actuator controls. Such

devices may result in excess heating and cause damage to the actuator

and associated wiring and could cause a fire, death, physical injury or

property damage. If such devices are used, Invacare shall not be liable and

the limited warranty is void.

CAUTION: CHAIRS EQUIPPED WITH VENT TRAY

Reduced tilt/recline limits apply. See MK5 EX and MK5 TT-EX

ELECTRONICS OWNERS/SERVICE MANUAL, part number 1114808.

GENERAL GUIDELINES

SECTION 1

GENERAL

GUIDELINES

Содержание MK5 EX









































Результаты поиска

Содержание MK5 EX

Отзывы:

Похожие инструкции для MK5 EX

Бренды по названию

Популярные бренды

Invacare MK5 EX, Руководство владельца по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание MK5 EX

Отзывы:

Похожие инструкции для MK5 EX

Бренды по названию

Популярные бренды