manualshive.com logo in svg

Invacare MK5 EX, Руководство владельца по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Invacare MK5 EX Скачать руководство пользователя страница 4

Tilt/Recline Seating Systems®

4

Part No. 1114822

SPECIAL NOTES

WARNING/CAUTION notices as used in this manual apply to hazards

or unsafe practices which could result in personal injury or property

damage.
NOTICE
THE INFORMATION CONTAINED IN THIS DOCUMENT IS

SUBJECT TO CHANGE WITHOUT NOTICE.
WHEELCHAIR USER
As a manufacturer of wheelchairs, Invacare endeavors to supply a wide

variety of wheelchairs to meet many needs of the end user. However,

final selection of the type of wheelchair to be used by an individual rests

solely with the user and his/her healthcare professional capable of

making such a selection. Invacare highly recommends working with a

certified rehab technology supplier and/or a member of NRRTS or

RESNA.
RESTRAINTS - SEAT POSITIONING STRAPS
Invacare recommends that wheelchair users NOT be transported in

vehicles of any kind while in wheelchairs. As of this date, the Depart-

ment of Transportation has not approved any tie-down systems for

transportation of a user while in a wheelchair, in a moving vehicle of any

type.
It is Invacare’s position that users of wheelchairs should be transferred

into appropriate seating in vehicles for transportation and use be made

of the restraints made available by the auto industry. Invacare cannot

and does not recommend any wheelchair transportation systems.

SPECIFICATIONS

NOTE: All specifications apply to Tilt only, Recline only and Tilt/Recline systems except where

specified. All specifications are approximate.
NOTE: Refer to the wheelchair owner's manual for complete specifications on base and operation.

Seat Width Range:

16 to 22-inches - In 1-inch increments

Seat Depth Range:

16 to 22-inches - In 1-inch increments

Back Height Range:

  Tilt and Recline:

20 to 26-inches - In 1-inch increments

  Recline Only:

20 to 26-inches - In 1-inch increments

  Tilt Only:

20 to 25-inches - In 1-inch increments

Back Angle Range:

Tilt Only Systems:

90

o

 to 115

o

 - in 5

o

 increments

Tilt Range:

Tilt Only Systems and

Tilt/Recline Systems:

0

o 

Seat Angle - 0

o 

to 45

o

; 5

o 

Seat Angle - 5

o 

to 50

o

SPECIAL NOTES/SPECIFICATIONS

SPECIAL 

NOTES/SPECIFICATIONS

Содержание MK5 EX









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды