Invacare Fox Скачать руководство пользователя

Страница: 78 / 92

Invacare® Fox™

9.3.2 Weekly

Item

Inspection check

If inspection is not passed

Armrests/side parts

Check that armrests are firmly attached
in their holders and do not wobble.

Tighten the screw or clamping lever that holds
the armrest (refer to

5.2 Adjustment possibility for

remote, page 28

Contact your provider.

Tires (puncture-proof)

Check that the tires are undamaged.

Contact your provider.

9.3.3 Monthly

Item

Inspection check

If inspection is not passed

All upholstered parts

Check for damage and wear.

Contact your provider.

Removable legrests

Check whether the legrests can be fixed securely and whether
the loosening mechanism is properly operable.

Contact your provider.

Check that all adjustment options function properly.

Contact your provider.

Casters

Check that casters rotate and swivel freely.

Contact your provider.

Drive wheels

Check that the drive wheels rotate without wobbling. It is
easiest to have someone stand behind the mobility device
and observe the drive wheels as you drive away from them
to do this.

Contact your provider.

Electronics and connectors

Check all cables for damage and all connecting plugs for snug
fit.

Contact your provider.

1577074-F

Содержание Fox





























































































Результаты поиска

Содержание Fox

Отзывы:

Похожие инструкции для Fox

Бренды по названию

Популярные бренды

Invacare Fox, Руководство пользователя

Результаты поиска

Содержание Fox

Отзывы:

Похожие инструкции для Fox

Бренды по названию

Популярные бренды