Invacare Fox, Руководство пользователя

Страница: 42 / 92

Invacare® Fox™
5.8.2 Adjusting the backrest stopper
CAUTION!
Adjusting the seat tilt or the backrest angle
changes the geometry of the mobility device
and directly influences its dynamic stability!
– For details regarding dynamic stability,
negotiating gradients and obstacles and the
correct adjustment of seat tilt or backrest angle,
refer to
6.5 Taking Obstacles, page 58 and 6.6
Driving up and down gradients, page 60 .
CAUTION!
Risk of tipping if the backrest angle is set too far
backwards for a seat on the rear seat position
and with a seat depth larger than 460 mm
– When your seat with a seat depth larger than
460 mm is positioned on the rear seat position,
adjust the backrest angle to maximum 105°.
• 4 mm Allen key
The backrest is fitted with a stopper allowing you to
easily reset the backrest to your preferred backrest angle.
Adjusting the backrest is only possible between this angle
and smaller angles. If you want to use a larger backrest
angle, you need to adjust the stopper.
A
85°
B
95°
C
105°
D
115°
By default, the stopper is set to a backrest angle
of 105°.
1. Remove screw
A
.
2. Adjust stopper to desired angle.
3. Refit screw.
42 1577074-F