Invacare Fox Скачать руководство пользователя

Страница: 46 / 92

Invacare® Fox™

5.8.7 Adjusting the tension adjustable backrest upholstery

Remove the backrest cushion (attached with
hook–and–loop straps) by pulling it up and off to access
the adjustment straps.

Adjust the tension of the individual straps as desired.

Replace the backrest cushion.

5.8.8 Adjusting Matrx backrests

See corresponding manual.

5.9 Adjusting the headrest

WARNING!
Risk of injury if the mobility device is used as a
vehicle seat without a headrest

This can cause the neck to be hyperextended
during collisions.

– It is recommended to use a headrest during

transport. The Invacare headrest for this
mobility device (available as an option) is the
perfect solution for use during transport.

– The headrest must be adjusted to the user's

ear height.

5.9.1 Adjusting Position of Rea Headrest or Neckrest

The adjustment of the position is the same for all Rea
headrests and neckrests.

1577074-F

Содержание Fox





























































































Результаты поиска

Содержание Fox

Отзывы:

Похожие инструкции для Fox

Бренды по названию

Популярные бренды

Invacare Fox, Руководство пользователя

Результаты поиска

Содержание Fox

Отзывы:

Похожие инструкции для Fox

Бренды по названию

Популярные бренды