Invacare Fox Скачать руководство пользователя

Страница: 36 / 92

Invacare® Fox™

On both sides, loosen the bottom backrest screw

Do not remove the screws!

Move the backrest to the required seat depth.
You can adjust the seat depth steplessly. Use scale

on the seat as a guide for this purpose.
Ensure that the same seat depth is set on both sides.

Re-tighten the screws.

5.6.11 The hip support

The hip support can be combined with the flip-up armrest
only.

Removing hip support

Pull lever

upwards.

Remove hip support from holder.

Inserting hip support

Insert hip support in holder.

Push lever

downwards.

Ensure that hip support locks with an audible click.

Adjusting position of hip support

Tools

•

5 mm Allen key

Loosen screw

Do not remove it.

Adjust hip support to desired position.

Tighten screw.

Adjusting width of hip support

Tools

•

2 x 5 mm Allen key

1577074-F

Содержание Fox





























































































Результаты поиска

Содержание Fox

Отзывы:

Похожие инструкции для Fox

Бренды по названию

Популярные бренды

Invacare Fox, Руководство пользователя

Результаты поиска

Содержание Fox

Отзывы:

Похожие инструкции для Fox

Бренды по названию

Популярные бренды