Invacare Crossfire All Terrain Скачать руководство пользователя | Manualshive

Страница: 84 / 88

background image

Top End

®

Crossfire™

9 Warranty

9.1 Warranty Information

United State Limited Warranty

PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE
TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975.

This warranty is extended only to the original purchaser who purchases this product when new and unused from Invacare or a dealer. This
warranty is not extended to any other person or entity and is not transferable or assignable to any subsequent purchaser or owner. Coverage
under this warranty will end upon any such subsequent sale or other transfer of title to any other person.

This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state.

Invacare warrants the frames when purchased new and unused to be free from defects in materials and workmanship for a period of three (3)
years from the date of purchase for the Crossfire All-Terrain and a period of five (5) years from the date of purchase for the Crossfire Titanium
and Crossfire T6 from Invacare or a dealer, with a copy of the seller’s invoice required for coverage under this warranty.

Invacare warrants the upholstered materials (seat and back) and remaining components of this product when purchased new and unused to
be free from defects in materials and workmanship for a period of thirty-six (36) months from date of purchase from Invacare or a dealer,
with a copy of the seller’s invoice required for coverage under this warranty. If within such warranty periods any such product shall be
proven to be defective, such product shall be repaired or replaced, at Invacare’s option. This warranty does not include any labor or shipping
charges incurred in replacement part installation or repair of any such product. Invacare’s sole obligation and your exclusive remedy under
this warranty shall be limited to such repair and/or replacement.

For warranty service, please contact the dealer from whom you purchased your Invacare product. In the event you do not receive satisfactory
warranty service, please write directly to Invacare at the address at the bottom of this page. Provide dealer’s name, address, the product model
number, date of purchase, indicate nature of the defect and, if the product is serialized, indicate the serial number. Do not return products to
our factory without our prior consent.

84

1134872-D~08

«
...
82
83
84
85
86
...
»

Содержание Crossfire All Terrain

























































































Отзывы:

Нет отзывов

Похожие инструкции для Crossfire All Terrain

Бренд: panthera Страницы: 9

Бренд: panthera Страницы: 9

Бренд: Otto Bock Страницы: 34

Бренд: Pressalit Care Страницы: 10

KLICK Power Limited Edition

Бренд: Klaxon Страницы: 37

HD Balance 62471

Бренд: HD Rehab Страницы: 2

Бренд: Pride Страницы: 43

Бренд: Pride Страницы: 43

Бренд: Zinger Страницы: 31

Бренд: Küschall Страницы: 44

Бренд: Quantum Страницы: 2

Бренд: FREERIDER Страницы: 55

Бренд: Innovate Страницы: 18

Бренд: OFF CARR Страницы: 8

Бренд: Karman Страницы: 12

Бренд: Handicare Страницы: 40

Бренд: Keizer Страницы: 26

Бренд: Days Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды