Invacare Crossfire All Terrain, Руководство пользователя

Страница: 61 / 88

Service
5.3 Removing/Installing Foldover Back Upholstery
WARNING!
–
ALWAYS perform these procedures in the presence
of an assistant. The position of the footrest, camber
tube, seat angle, back angle, the tautness of the back
upholstery as well as the user's condition are directly
related to the wheelchairs stability. Any change to
one or any combination of the five may cause the
wheelchair to decrease in stability. Use EXTREME
caution when using a new seating position. The
addition of anti-tippers may be required.
Removing Foldover Back Upholstery
1. Unfasten the two fastening flaps A that secure the bottom of the
existing back upholstery B to the back canes C .
2. Unfold the top of the back upholstery
B
.
3. Lift up on the existing back upholstery
B
and remove from the
wheelchair.
Installing Foldover Back Upholstery
1. Install the new back upholstery B onto the back canes C .
2. Wrap the end of a fastening flap A around the back cane C .
3. Insert the end of the fastening flap
A
through the loop
D
.
4. Wrap the fastening flap
A
around the back cane
C
again and
press firmly to secure.
5. Fold the top of the back upholstery
B
down over the back canes
C towards the front of the wheelchair.
6. Press firmly to secure the fastening strips E .
1134872-D~08 61