SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
Part No 1100868
27
9000 Jymni™Pediatric Series
❑
Ensure all spokes are uniformly tight.
❑
Inspect handrims for signs of rough edges or peeling.
❑
Inspect axle assembly for proper tension by spinning caster. Caster should come to a
gradual stop.
❑
Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a
stop.
❑
Ensure wheel bearings are clean and free of moisture.
❑
Check headtube locknuts for tightness.
❑
Inspect casters for cracks and wear.
❑
Inspect front casters for cracked, bent or broken spokes.
❑
Clean upholstery and armrests.
❑
Check that all labels are present and legible. Replace if necessary.
Inspect/Adjust Weekly
❑
Ensure that the wheel locks prevent the wheelchair from moving when engaged.
❑
Inspect tires for flat spots and wear.
❑
Check pneumatic tires for proper inflation.
❑
If equipped, check that quick-release axles lock properly. Lubricate if necessary.
❑
Inspect rear wheels for cracked, bent or broken spokes.
❑
Ensure all spokes are uniformly tight.
❑
Inspect axle assembly for proper tension by spinning caster. Caster should come to a
gradual stop.
❑
Inspect front caster for cracked, bent or broken spokes.
Inspect/Adjust Monthly
❑
Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
❑
Check that the wheel locks do not interfere with tires when rolling.
❑
Check that the wheel lock pivot points are free of wear and looseness.
❑
Inspect seat and back for loose or broken hardware.
❑
Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑
Inspect back cane hand grips for wear/looseness/deterioration.
❑
Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a
stop.
❑
Ensure wheel bearings are clean and free of moisture.
❑
Check headtube locknuts for tightness.
