Invacare 9000 Jymni Light Weight Скачать руководство пользователя страница 32

Страница: 32 / 68

SECTION 4—FRONT RIGGINGS

9000 Jymni™Pediatric Series

Part No 1100868

Swingaway Footrest Height Adjustment

NOTE: For this procedure, refer to FIGURE 4.2.

1. Remove the swingaway footrest assembly. Refer to Installing/Removing the

Swingaway Footrest Assembly on page 31.

NOTE: Lay the assembly on a flat surface to simplify this procedure.

2. Remove impact guards and/or calf strap, if necessary.

3. Perform one of the following:

A. Wheelchairs equipped with 80° swingaway footrest (Model Number J932A-14):

• Loosen, but do not remove the bolt and lock nut that secure the lower footrest

assembly to the upper footrest support.

• Reposition the lower footrest assembly to the desired height.

• Securely tighten the bolt and locknut.

B. Wheelchairs equipped with 70° swingaway footrest (Model Number J932A) OR

90° swingaway foot-rest (Model Number J933A):

• Remove the bolt, locknut and four washers that secure the lower footrest

assembly to the upper footrest support.

• Align the mounting hole of the lower footrest assembly with desired height

adjustment hole in the lower footrest support.

• Reinstall the bolt through the desired height adjustment hole in the lower

footrest assembly and through the mounting hole in the lower foot-rest
support. Securely tighten with the locknut and four washers.

4. Repeat this procedure for the other footrest, if necessary.

5. Replace impact guards and/or calf strap, if necessary.

6. Reinstall the swingaway footrest assembly. Refer to Installing/Removing the

Swingaway Footrest Assembly on page 31.

FIGURE 4.2

Swingaway Footrest Height Adjustment

Bolt and

Locknut

Upper Footrest

Support

J932A-14

Upper Footrest

Support

Lower Footrest

Assembly

Lower Footrest

Assembly

Locknut

Bolt

J932A and

J933A

Washers

Содержание 9000 Jymni Light Weight





































































Результаты поиска

Содержание 9000 Jymni Light Weight

Отзывы:

Похожие инструкции для 9000 Jymni Light Weight

Бренды по названию

Популярные бренды

Invacare 9000 Jymni Light Weight, Руководство по обслуживанию

Результаты поиска

Содержание 9000 Jymni Light Weight

Отзывы:

Похожие инструкции для 9000 Jymni Light Weight

Бренды по названию

Популярные бренды