Invacare 9000 Jymni Light Weight Скачать руководство пользователя

Страница: 56 / 68

SECTION 11—RECLINER

9000 Jymni™Pediatric Series

Part No 1100868

4. Make sure wheelchair is occupied and on a level surface before reclining.

5. Engage the wheel locks. Refer to Using Patient Operated Wheel Locks on page 53.

6. Inform the occupant of the wheelchair that the wheelchair is about to be reclined.

7. Make sure occupant

s hands and body are clear of all pinch points

8. Stand behind the wheelchair and grasp both handles firmly.

9. Squeeze release handles.

10. Slowly, pull back on the back assembly while squeezing the release handles.

11. When the back reaches the desired angle, slowly let go of the release handles.

12. To return the back to the full upright position, reverse the STEPS 8-11 keeping in mind

proper body mechanics.

FIGURE 11.1

Recliner Operation

Upright Position

Reclined Position

Handle

Release Levers

Wheelchair

Level Surface

Wheelchair

Level Surface

Release Levers

Содержание 9000 Jymni Light Weight





































































Результаты поиска

Содержание 9000 Jymni Light Weight

Отзывы:

Похожие инструкции для 9000 Jymni Light Weight

Бренды по названию

Популярные бренды

Invacare 9000 Jymni Light Weight, Руководство по обслуживанию

Результаты поиска

Содержание 9000 Jymni Light Weight

Отзывы:

Похожие инструкции для 9000 Jymni Light Weight

Бренды по названию

Популярные бренды