SECTION 10—BASE FRAME
90
Adjusting Weight Distribution Procedure
1. Loosen the four mounting screws that secure the seat support brackets to the base
frame.
WARNING
DO NOT adjust seat beyond limit stops.
2. Adjust seat forward or back to the position determined from Adjustment Options on
3. Retighten the four mounting screws securing the seat support brackets to the base
frame.
4. Test wheelchair maneuverability, comfort, and handling.
5. Repeat STEPS 1-4 for further adjustment, if necessary.
FIGURE 10.6
Repositioning the Motor
Repositioning the 4 Pole Motor/Gearbox or SSD Motor/Gearbox
NOTE: For this procedure, refer to FIGURE 10.7.
NOTE: The motor/gearbox assembly can be repositioned to lengthen or shorten the wheelbase by
2-inches in 1-inch increments.
• Standard Position - Lengthens the wheelbase and gives you the most stability and
standard maneuverability.
• 1-inch Forward - Centers the wheelbase and gives you standard stability and
maneuverability.
• 2-inch Forward - Shortens the wheelbase and increases maneuverability and
distributes additional weight on rear wheels.
Base Frame
Washer
Mounting Screw
Seat Support Bracket