Page 40 of 83
Device
at
Description
Notes
HDD
Node0
Shared Disk Drive 1 mounted
on the removable caddy. The
drive has an SCA connector
that permits hot swap.
SCSI-ID = 0
Terminator = Disabled
TermPwr = Off
SCA-Adapter
Node0
Adapter fixed at the rear of
the backplane on top section.
Terminator = Auto
Internal Cable
Node0
SCSI-68 pin ultra-wide cabel
8’ long that connects the
SCA-adapter (IN) and the
ITI-8241C-R (Channel A)
ITI-8241C-R
Node0
The rear I/O Transition card
has a SCSI channel A internal
connector and an external
micro connector.
This card is plugged at
the rear of the ITI-
8241C-S.
External Cable
(One End)
Node0
Micro connector SCSI
external cable
External Cable
(Other end)
Node1
Micro connector SCSI
external cable
ITI-8241C-R
Node1
The rear I/O Transition card
has a SCSI channel A internal
connector and an external
micro connector.
This card is plugged at
the rear of t he ITI-
82141C-S.
Internal Cable
Node1
SCSI-68 pin ultra-wide cable
8’ long that connects between
SCA-adapter (IN) and ITI-
8241C-R (channel A)
SCA-Adapter
Node1
Adapter fixed at the rear of
the backplane on top section.
Terminator = Auto
DHH
Node1
Shared Disk Drive 1 mounted
on the removable caddy. The
drive has an SCA connector
that permits hot swap.
SCSI-ID=0
Terminator = Disabled
TermPwr = Off
Table 6: SUNCluster™ Cabling and Termination Details
Additional configurations are possible, additional
diagrams may be added in a future manual revision.
Содержание ITI-8001
Страница 8: ...Page 8 of 83 END USER LICENSE AGREEMENT FOR SOFTWARE 77 PRODUCT WARRANTY 81 READER S COMMENTS 83 ...
Страница 30: ...Page 30 of 83 LVD bus segment The adapter will terminate the other end of the bus automatically ...
Страница 37: ...Page 37 of 83 Figure 12 Dual Rear SCSI Cabling in Side by Side Layout two disks per node using SCA adapter ...
Страница 69: ...Page 69 of 83 Wide SCSI 16 Bit SCSI Table 8 Glossary of Terms ...