Intralock Tools 950C Скачать руководство пользователя

Страница: 9 / 19

SETTING DEFAULT MANUFACTURER ID

The default or power on ID is the MFG ID number the machine selects when reset or turned

on. As with any ID, it must be in the range of 1 through 960, and the table must be correct. It can be set

by you and remains set until you select a different ID.

Press the

keys to enter the

EDIT

mode. The display will show

EDIT.

Press the

key to display the current default ID. To change the ID to 23, press

followed by

The ITL950C will display

DEFAULT ID 23.

3) Press the

key to return to the

EDIT

mode. Press the

key and follow display

comands and the new ID will be displayed when the ITL950C completes the self-test sequence.

SETTING THE BAUD RATE

See page 14 for table and instructions.

UNITS (INCHES – METRIC)

Press

and the

key three times and the display will read

UNITS = INCHES.

To read the display in metric, press the

key. Press the

key twice

and follow display instructions.

SETTING DEFAULT CUT RATE

The default cut rate is a number from 1 through 4 that defines how fast the blank is fed into

the cutter. 1 is the fastest rate and should work for most blanks however if the cutter becomes
dull or thick blanks are used, you may need to select a slower speed. Proceed as follows to set

the default cut rate. Press

to enter the

EDIT

mode. Press

four

times to display

CUT FEED RATE(current feed rate).

To change the rate to 2, press

The machine will now display

CUT FEED RATE

. Press

and

Follow display

instructions and all plunge cuts will be made at cut rate 2.

SETTING DISPLAY MODE

Press

to enter the

EDIT

mode. Press

five times to display

BAR GRAPH DISPLAY MODE SELECTED

NUMERIC DISPLAY MODE SELECTED.

Press

key to toggle. Press the

key twice and follow display instructions.

Содержание 950C




















Результаты поиска

Содержание 950C

Отзывы:

Похожие инструкции для 950C

Бренды по названию

Популярные бренды

Intralock Tools 950C, Руководство по эксплуатации

Результаты поиска

Содержание 950C

Отзывы:

Похожие инструкции для 950C

Бренды по названию

Популярные бренды