Intralock Tools 950C Скачать руководство пользователя

Страница: 16 / 19

INVALID MAXSPC 11

Incorrect maximum space number. Range is 1 through 10.

INVALID MAXDPT #

Incorrect maximum depth number. Range is I through 10

INVALID MINDPT #

Incorrect minimum depth number. Range is 0 or 9.

INVALID BAUD RATE Incorrect baud rate number. Range is 1 through 8.

ERROR LOADING TABLE Remote code load has failed. Check serial port parameters.

INVALID SPEED

Incorrect feed rate number. Range is 1 through 4.

RANGE IS 1 TO 4

INVALID TIP TYPE

The tip number selected is invalid. The range is 0 through 3.

RANGE IS 0 TO

INVALID FLAT WIDTH The fiat number selected is invalid. The range is 1 through 10.
RANGE IS 1 TO

INVALID DEPTH

The depth entered is invalid. The range is 110 TO 465.

RANGE IS 110 TO 465

INVALID SPACE VALUE The space entered is out of range. The range is 1 to 10.
RANGE IS 1 TO

BAD TABLE ENTRY The table being loaded has invalid entries. If the entry is a custom ID then recheck your entries.

If the entry is in the range of 1 through 800 then check the list of manufacturers and report
the error to your distributor. Note that if you select an ID not in the list it will not be correct.

INVALID INSERT CF

The correction value exceeds the allowed range. Range is .009 to -.009.

Содержание 950C




















Результаты поиска

Содержание 950C

Отзывы:

Похожие инструкции для 950C

Бренды по названию

Популярные бренды

Intralock Tools 950C, Руководство по эксплуатации

Результаты поиска

Содержание 950C

Отзывы:

Похожие инструкции для 950C

Бренды по названию

Популярные бренды