Intimus INT-GU-05280EPSP, Руководство по эксплуатации

Страница: 39 / 86

Operation Manual 5280 EPSP
39
7.5.3 Change of clamping force
Changes of the clamping force are made on the screen of the programmer 3 (Fig.18)
The method of changing the clamping force has been described in the "Instructions for
program unit".
7.5.4 Rules for selecting the contact pressure.
The value of pressing force is selected experimentally, in relation to the type, width and
height of the cut material.
The following rules must be observed:
- the higher the pile, the greater the downforce
- the greater the cutting width, the greater the downforce
- the harder the material, the greater the downforce
7.6 Cutting line indicator (optical)
The cutter is equipped with an optical cutting line indicator. A thin light line indicates the
cutting line on the material to be cut.
7.7 Cutting (pressing and cutting)
DANGER!
Do not put hands into cutting zone!