background image

292

IO

S  AVE THESE INSTRUCTIONS

(292IO)  BUBBLE SPA WITH POOL  ENGLISH  7.5” X 10.3”  PANTONE 295U  07/15/2016

English

Page 3

IMPORTANT SAFETY RULES

When installing and using this electrical equipment, basic safety precautions should always be followed, including the following.

READ AND FOLLOW ALL INSTRUCTIONS

•  Risk of Accidental Drowning. Extreme caution must be exercised to prevent unauthorized access  

  by children. To avoid accidents, ensure that children cannot use this spa unless they are

  supervised at all times.

•  Risk of drowning. Inspect the spa cover regularly for leaks, premature wear and tear, damage, or  

   signs of deterioration. Never use a worn or damaged cover: it will not provide the level of 

   protection required to prevent unsupervised access to the spa by a child.

•  Risk of injury. Replace damaged cord immediately. Do not bury cord. 

•  Risk of Electric Shock. Do not permit any electric appliance, such as a light, telephone, radio, or 

  television, within 3.5 m (11.5 feet) of a spa or hot tub.

•  Risk of Electric Shock. Do not use the spa when it is raining, thundering or lightning.

•  The spa electrical appliance should be supplied through a residual current device (RCD) having a 

  rated residual operating current not exceeding 30 mA. 

•  The spa electrical appliance comprises a portable residual current device (PRCD) having a rated    

  residual operating current not exceeding 10 mA. If a leakage current of more than 10 mA is detected,  

  the PRCD will operate and cut-off the power supply, in such case, unplug and stop using the spa at  

  once. You must contact the local service center for assistance and/or repair of the product. 

•  Parts containing live parts, except parts supplied with safety extra-low voltage not exceeding 12 V, 

  must be inaccessible to a person in the spa.

•  Electrical installation shall ful

fi

 ll the requirements of local national standards. 

•  Parts incorporating electrical components, except remote control devices, must be located or 

fi

 xed so 

  that they cannot fall into the spa.

•  To reduce the risk of injury, do not permit children to use this product unless they are closely 

  supervised at all times.

•  Children should not use spas or hot tubs without adult supervision.

•  To reduce the risk of child drowning, supervise children at all times. Attach and lock spa cover after 

 each use.

•  To reduce the risk of injury:

a) The water in a spa should never exceed 40°C (104°F). Water temperatures between 38°C (100°F) 

  and 40°C (104°F) are considered safe for a healthy adult. Lower water temperatures are 

  recommended for young children and when spa use exceeds 10 minutes.

b) Since excessive water temperatures have a high potential for causing fetal damage during the early 

  months of pregnancy, pregnant or possibly pregnant women should limit spa water temperatures to 

 38°C (100°F).

c) Before entering a spa or hot tub, the user should measure the water temperature with an accurate 

  thermometer since the tolerance of water temperature-regulating devices varies.

d) The use of alcohol, drugs, or medication before or during spa use may lead to unconsciousness with 

  the possibility of drowning.

e) Obese persons and persons with a history of heart disease, low or high blood pressure, circulatory 

  system problems, or diabetes should consult a physician before using a spa.

DANGER

WARNING

Содержание PureSpa PS-BH-20

























Отзывы: