292
IO
S AVE THESE INSTRUCTIONS
(292IO) BUBBLE SPA WITH POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/15/2016
English
Page 14
OPERATION (continued)
Temperature Adjustment Buttons:
Pressing the Temperature Increase or Decrease
buttons will cause the LED to
fl
ash. When
fl
ashing you can adjust to the desired temperature
setting. If you hold these buttons down the values will rapidly increase or decrease. The new
and desired temperature setting will remain on the LED display for 5 seconds to con
fi
rm the new
value.
NOTE:
The default temperature is 20°C (68°F).
NOTE:
Temperature adjustment ranges from 20°C (68°F) to 40°C (104°F).
Water Filter Button:
This button turns the
fi
lter pump on and off. Pressing the button, the
system will start
fi
ltering the “A” side
fi
rst for 10 hours with the indicator light “A” showing green,
then automatically switch to the “B” side and
fi
lter for 2 hours with the indicator light “B” showing
green. After two such cycles or 24 hours, the
fi
lter pump will automatically turns off. The water
fi
lter icon on the display is green when activated. If the heating system is activated the
fi
ltration
system will automatically start. The
fi
ltration system can be activated together with the bubble
function.
When the indicator light “B” is illuminated and the heater is off, press the fi lter button to
turn off the fi ltration.
When the indicator light “B” is illuminated and the heater is in standby mode (indicated
by a fl ashing green fl ame icon), press the fi lter button to switch the fi ltration to the “A”
side.
NOTE:
There is a delay of about 10 second for the
fi
lter pump motor to switch from one side to
another side of the tub.
Bubble Button:
Use this button to activate the massage system, which has a 30-minute
auto-shutoff feature. The bubble icon on the displays is green when activated.
WARNING:
Do not run Bubble system when the cover is attached, air can accumulate inside the
spa and cause irreparable damage and bodily harm.
Bubble Control Knob:
Once the bubble massage is activated, use this knob to select which
side of the tub to run the bubble massage system.
LED Display:
Once plugged in the LED displays the “A” side water temperature automatically.
NOTE:
the built-in hard water treatment function works automatically in conjunction with the
fi
ltration system.
40
C
o
“B” side bubble massage activated.
Bubble massage activated on both sides.
“A” side bubble massage activated.
