background image

292

IO

S  AVE THESE INSTRUCTIONS

(292IO)  BUBBLE SPA WITH POOL  ENGLISH  7.5” X 10.3”  PANTONE 295U  07/15/2016

English

Page 21

MAINTENANCE (continued)

Spa Tub Cleaning

If dirt is visible in the water or water becomes cloudy and proper water chemistry does not clear it up, change 
the water and clean the spa tub. See “Spa Tub Drainage” section on how to drain the spa.
While empty, remove the cartridge housing from inside of the spa tub wall, clean and/or replace the 

fi

 lter 

cartridge. Use a sponge and mild soap solution to wipe away any soil or stains on the inside of the spa wall. 
Rinse thoroughly before re

fi

 lling with clean water.

IMPORTANT: 

Do not use steel wool, hard brushes or abrasive cleaners.

Spa Tub Air Valve Fastening

Check the spa tub air valve for leakage and tightness before use. If air is leaking from the air valve, use the 
provided wrench 

(22) 

to tighten the air valve as follow:

1.

  Make sure the spa tub is de

fl

 ated, open the air valve cap 

and insert the wrench 

(22)

 into the air valve body

 (see 

drawing 23)

.

2.

  With one hand, hold the backside of the air valve base 

from the inside of the spa tub wall and turn the wrench

  

(22) 

clockwise.

 IMPORTANT:

 Never adjust the air valve base when the 

spa is in use or 

fi

 lled with water. Only use the air valve 

wrench if the air valve is loose or there is leakage around 
air valve base. Do not over tighten the air valve: over 

 

tightening can damage the valve. Just ensure the air valve is snug and not leaking.

Spa Cover

The attachment buckles of the cover are locking buckles. Two keys are provided in the plastic bag with the 
manual and other accessories. Each buckle is marked with “locked” and “unlocked” symbols for easy operation: 
put the key into the slot on the buckle and turn it to the appropriate position to lock or unlock the buckle 
respectively. 
To assure safety from unauthorized access, always put the cover on when spa is not in use and lock all buckles. 
Always keep the keys out of reach of children. In case you misplace the keys, you can use any similar size 

fl

 at 

screwdriver to lock or unlock the buckles. 
Inspect the spa cover regularly for leaks, premature wear and tear, damage, or signs of deterioration. Never use 
a worn or damaged cover: it will not provide the level of protection required to prevent unsupervised access to 
the spa by a child.

23

22

Содержание PureSpa PS-BH-20

























Отзывы: