34
Door Communication System - KNX
(with Axis® and Mobotix®)
The fields to set up are:
-
Device type:
Select if the image source is from Axis® or Mobotixi® IP
camera.
-
Private IP:
IP address corresponding to the private IP of the IP Camera.
The application adjusts the bandwidth and quality.
-
Public port:
Port used by the application to connect from outside without
VPN (NAT). For further information about remote connections please refer
to th
e manual “Remote setup without VPN”
-
Username:
Username of the IP camera
-
Password:
Password of the IP camera.
-
Open door - KNX:
Group address corresponding to the communication
object for the 1 bit control (On/Off).
The application sends “1” when the
user touches down the
open door button, and a “0” two seconds after the
user touches up the button.
The public IP address is known by the application when connecting to a public IP to
remotely control KNX installation The private port of the IP camera is port 80.
