14
Devices
Simple light / 1 bit generic control
These two types of devices correspond to the Boolean control of lights or generic
on/off elements. Moreover, they include a status field that can be enabled to allow
device status monitoring.
The status enabling:
-
Enable status:
When active, status from the selected device is returned.
Keep in mind that to activate this flag, the selected device should support
the status value return.
The group addresses to configure in both cases are:
-
On/Off 1bit:
1bit on/off communication object.
-
Status 1bit:
1bit status. Used for initial reading and value updates.
For the correct functioning of the device, it is important to check if the reading flag of
the status 1 bit group address has been enabled in ETS.
