IVR-6126 Series User Guide
42
7.2 Start a Frame Analysis Test Case
Start a Frame Analysis test case needs to follow the following steps:
• Step 1: See section 7.1 Start a RFC2544 test case Step 1 to configure port parameters;
• Step 2: After all parameters of port have been set completely, select ‘Frame Analysis’, then
click ‘Configuration’ to configure parameters, the detail instruction for setting data stream is
demonstrated in Table 7.6 Frame Analysis Configuration;
• Step 3: After all the parameters have been set completely, Click RUN/STOP button to run the test;
• Step 4: After the test has been done completely, switch the menu to view the Ethernet test results
in Table 7.7 Ethernet Test Results (Frame Analysis).
Test
Sub Menu
Parameters
Graph
• Graph: Display test results, include:
• Port 1: Utilisation ratio • Port 2: Utilisation ratio
• Port 1: Bandwidth • Port 2: Bandwidth
Figure 7.31 Graph
Save
• Save the test results
Figure 7.32 Save
