IVR-6126 Series User Guide
29
Test
Sub Menu
Parameters
MAC
Figure 7.13 VLAN Configuration Dialogue Box
Figure 7.14 MAC
IP
• Port Selection: Select test port, support: • Port 1 • Port 2
(Note: This option is ONLY available under the dual port test situation, the default setting is port 1.)
• Stream Number: Select data stream
(Note: RFC2544 test support stream1.)
• IP Version: Select IP version, support • IPV4 • IPV6
• Source:
• IPv4 Address: Set the source IPv4 address1
(Note: It is ONLY available when IPv4 has been selected.)
• IPv6 Address: Set the source IPv6 address
(Note: It is ONLY available when IPv6 has been selected.)
• Coupled: Enable coupled function
(Note: This is ONLY available under Dual ports test.)
• Destination:
• IPv4 Address: Set destination IPv4 address
(Note: It is ONLY available when IPv4 has been selected.)
• IPv6 Address: Set destination IPv6 address
(Note: It is ONLY available when IPv6 has been selected.)
• TTL (Time to Live): Set value for TTL, range from 0 to 255
(Note: It is ONLY available when IPv4 has been selected.)
