Accusafe Sensor Module User Manual
10
06/21/2021
SENSOR DATA PANEL FOR CHANNEL 1
FIGURE 3-5
PUMP CONTROL PANEL FOR CHANNELS 1 & 2
FIGURE 3-6
PUMP SPEED PANEL FOR CHANNELS 1 & 2
NOTE:
Pump speed is normally factory set at 50% but can differ depending on the gas and
range.
DO NOT CHANGE PUMP SPEED WITHOUT CONSULTING WITH THE FACTORY
AS IT WILL AFFECT CALIBRATION ACCURACY!!
3.1.3 SENSOR MEASUREMENTS
The SENSOR MEASUREMENTS panel is the display panel typically viewed during normal
operation. This panel will contain a numeric and graphical display of all data from the panels
enabled in the Control Panels menus. Typically this will only be the gas concentration data but
some users may wish to view Environmental data as well (ENVIRO Panels).
The default display chart length (horizontal time period displayed) is 3 hours. This period can be
lengthened or shortened to the user’s need – see section 3.1.8 for details on changing display
chart length.
TOUCH + OR
–
BUTTONS
TO FINE TUNE VALUE UP
OR DOWN.
TOUCH AND MOVE SLIDER
RIGHT TO INCREASE OR LEFT TO
DECREASE VALUE.
