Accusafe Sensor Module User Manual
14
06/21/2021
3.1.5 RECIPES
The Recipes menu provides a programmable scheduler for properly configured control panels.
This generally applies to panels the contain both a sensor and an actuator which is
not
the case
for most instances of the ACCUSAFE system. As such, no recipe examples are provided for the
purposes of this manual.
3.1.6 PANEL CONFIGURATION
The Panels Configuration menu provides access to the internal parameters of the numerous
control panels found in the ACCUSAFE controller module. The primary reason a user may wish
to make changes to his panels would be to rename the gas sensor channels to better reflect the
locations they correspond to. Figure 3-13 below shows the Sensor Measurement screen shown
earlier with renamed gas sensor channels. These new names will also be reflected in the Control
Panels view of each panel as shown in Figure 3-14 below. Notice the Panel names themselves
do not change. These names are fixed and cannot be changed.
FIGURE 3-13 FIGURE 3-14
To make changes to the sensor channel names, open the Panel Configuration menu by touching
the icon shown above. You will be prompted for a passcode as shown below left. Touch in the
passcode field to open an entry window and enter “1111” as shown below, right. Press the blue
enter button to save entry then
press “OK” and the screen will open as shown in Figure 3-17 on
the next page.
FIGURE 3-15
