Interroll Roller Conveyor SH 1110
Safety
Version 1.0 (06/2022) en
Translation of original operating instructions
11
Dangers
The following list informs you about the various types of danger or damage that may occur
while working with the module.
Safety devices
4
Perform any maintenance and repair work on the module only when it is powered down and
ensure that it cannot be started accidentally.
4
In an area frequented by people or if people can reach between conveying goods, take
additional protective measures.
4
Secure the gap of rollers at workplaces using fillers or covers with a gap of maximum 5 mm.
4
Do not remove protective covers or housings.
4
Regularly check safety devices.
Heat
4
Do not touch the motor/RollerDrive during operation. Risk of burns.
Electricity
4
Reach into the module only if the module is de-energized.
4
Always keep the control cabinet closed. Before opening the control cabinet: Main power
switch to "OFF".
Rotating parts
4
Never wear loose clothing.
4
Never wear jewelery, such as necklaces or bracelets.
4
If you have long hair, always wear a hair net.
Parts lying around or
falling off
4
Remove equipment or material which is not required from the workspace.
4
Wear safety shoes.
4
Specify and monitor careful placement of the goods on the conveyor.
Risk of injury due to faults
during operation
4
Regularly check the module for visible damage.
4
Stop the module at once and ensure that it cannot be started accidentally in case of:
Smoke from a fire, unusual noise, blocked or defective conveying good, defective supports,
side guides or accessory devices, unauthorized removal of safety covers.
4
Promptly have qualified personnel determine the cause of the fault.
4
Immediately remove any escaping gear oil.
4
Do not step onto the module during operation.
Insufficient hygiene
4
Clean the module regularly.
4
Follow all notices relevant to hygiene in these instructions.
Maintenance intervals
4
Regularly perform maintenance and inspection work.
4
Use only OEM spare parts.
