Interroll Drum motor series i, S, S/A, D
Safety
10
Version 4.1 (06/2015) en-US
Translation of original instruction manual
Personnel qualification
Unqualified personnel cannot recognize risks and, as a result, is subject to greater dangers.
4
Authorize only qualified personnel with the activities described in these operating instructions.
4
The operating company must ensure that the personnel follows locally applicable regulations
and rules during their work with regard to safety and dangers.
The following target groups are addressed in these operating instructions:
Operators have been instructed in operating and cleaning the drum motor and follow the safety
guidelines.
The service personnel features a technical training or has undergone training by the
manufacturer and performs the maintenance and repair tasks.
Persons working on electrical equipment must have undergone technical training and training
provided by the manufacturer.
Dangers
The following list informs you about the various types of danger or damage that may occur
while working with the drum motor.
4
Maintenance or repair work must only be executed by authorized and qualified persons in
accordance with the applicable regulations.
4
Before turning on the drum motor, ensure that no unauthorized persons are near the
conveyor.
4
Only perform installation and maintenance work after you have switched off the power.
Ensure that the drum motor cannot be turned on accidentally.
4
Do not ingest the oil. In general, the oil used is relatively non-toxic, but it can still contain
hazardous substances. Ingestion can lead to nausea, vomiting and/or diarrhea. Generally,
medical care is not required, unless large quantities have been ingested. Nevertheless, a
physician should be consulted.
4
Avoid skin and eye contact. Prolonged or repeated skin contact without proper cleaning can
clog the pores of the skin and lead to skin problems such as oil acne and folliculitis.
4
Wipe up spilled oil as quickly as possible to avoid slippery surfaces. Ensure that oil does not
reach the environment. Properly dispose of dirty rags or cleaning materials to avoid self-
ignition and fires.
4
Extinguish oil fires with foam, spraying water or water mist, dry chemical powder or carbon
dioxide. Do not extinguish with water jet. Wear suitable protective clothing, incl. breathing
mask.
4
Observe the corresponding certificates at www.interroll.com.
4
Do not reach into areas between drum motor and conveyor belts or roller chains.
4
Tie long hair together.
4
Never wear loose clothing.
Operators
Service personnel
Electricians
Bodily injury
Electricity
Oil
Rotating parts
