Interroll Drum motor series i, S, S/A, D
88
Version 4.1 (06/2015) en-US
Translation of original instruction manual
Initial startup and operation
Initial startup
The drum motor may be put into operation only if it is correctly installed and connected to the
power supply and all rotating parts have been fitted with the corresponding protective devices
and guards.
The drum motor is filled with the correct oil quantity at the factory and ready for installation.
Prior to the initial startup of the motor, the following steps have to be performed:
4
Ensure that the motor type plate matches the version ordered.
4
Ensure that no contact points exist between objects, conveyor belts and rotating or moving
parts.
4
Ensure that the drum motor and the conveyor belt can move freely.
4
Ensure that the belt features the correct tension according to the recommendations from
Interroll.
4
Ensure that all bolts are tightened according to the specifications.
4
Ensure that no additional dangerous areas arise due to interfaces to other components.
4
Ensure that the drum motor is correctly wired and connected to the voltage supply with the
correct voltage.
4
Check all safety devices.
4
Ensure that no bystanders are in dangerous areas around the conveyor.
4
Ensure that the external motor protection is correctly adjusted to the rated motor current
and a corresponding switching device can switch off the motor voltage at all poles if the
integrated thermal circuit breaker trips.
Checks before the
initial startup
