InternetVSAT.com Proprietary
FOR the W3 Network
savebootparms pop 0x11e0001 c 0x530 pcr 0x365 f 1554410 s 27500000 o 1 t -20
For The PAS1R Network
savebootparms -pop 0x011e0001 -c 0x1029 -pcr 0x365 -f 1510000 -s 26693600 -o 1 -t -26
One you have typed these in, press enter. Then follow this with an hw command to reset the
terminal.
5) Parameter Confirmation
To confirm the parameters, re-telnet into the box and type
pconf.
A display as follows should
appear.
N.B. You do not have to enter Lat & Long coordinates but the NMS must know them to within
2Km to ensure network efficiency and in decimal after degree not minutes and seconds.
Troubleshooting:
If any of the parameters in the pconf command do not match up to what you have entered into
the box, then re-enter the boot parameters.
Parameter
Value
Description
-t
Transmit Power Level (Power)
-f
Outbound TDM Carrier to tune
to (Freq)
-pop
Population ID (POP)
-s
Symbol rate of TDM Carrier
(SymRate)
-o
ODU status (0-none, 1-
internal, 2-external power)
