InternetVSAT.com Proprietary
2. Before transmitting the CW signal, the RCST must establish receive
Synchronization. After receive synchronization is established:
On The W1 Network please enter the following commands and ensure correct reply from box
do not enter final command until authorized to do so by InternetVSAT.
Password:
Logged in as root
[
type
]
do 31
[
enter
]
[
reply from box
] dbadd sssparms regionid 0xa0 sar2segsize 52
OK
setdbready sssparms
OK
dbadd rfportinfo PortId 1 AdminStatus 1 txrfcenterfreq 14250000 TxIFCenterFreq
1300000000 TxBandwidth 575000000
The following fields must be specified - PopId
Usage: dbadd dbname {fieldname value} ...
setdbready rfportinfo
OK
dbadd tdmacarrier carrierid 100 TxRFFreq 14010500 CarrierControl 5
OK
setdbready tdmacarrier
OK
[
type
]
m -path on -output on -patt i0q0 -proc on -freq 1251 -sym 1.25 -power -28
[
enter
]
[
reply from box
] CACSetModConf
Address of txcb->SavedConfiguration = 0xDFD00
output ON pathmode ON dcpower ON procmode ON modulation QPSK pattern I0Q0 symbol
rate 1.25 analatt 28 idig 7.750000 qdig 7.750000 frequency 1247000 qdigitaloffs
et 0 band 2 kp 1 phsjump OFF
[
type
]
cacsetcw -freq 1251 -power -28 -time 120
[
enter
]
[
reply from box
] CACSetModConf
Address of txcb->SavedConfiguration = 0xDFD00
CW at freq 1247 (MHz) power -13.99999 (dBm) during 120 (s)
For the W3 network please enter the following. Do not enter until given authorisation to do so by
InternetVSAT:-
cacsetcw -power 0 -freq 989.6 -time 1000
