InternetVSAT.com Proprietary
Left click on Advanced to check gateway is installed and exit plus reboot
Windows 95/98
From desktop right click on Network Neighborhood
Left click on Properties
Scroll down to TCP/IP for network card installed in computer and highlight
Left click on Properties
Left click on Specify IP Address
Then enter the IP address you converted in step 1) as your gateway, and the pc ip address will
be one up from that address. So for 9C.D0, we have:-
IP 10.0.156.209
Subnet Mask -255.255.255.0
Gateway 10.0.156.208
Left click on OK for reboot
No use of proxy within Internet Explorer or Netscape.
3) StarPro1 Network Test
Connect PC to the Star Pro with cross over Ethernet cable, or with straight cable through hub,
router, etc.
Test connection by going to Command line and typing
Ping 10.0.xx.xx (Where xx is your converted IP from step 1)
If you are connected you should have a roundtrip time of around 10ms to StarPro1 & back.
Troubleshooting:-
If you are unable to ping your box, then check that the default IP address you converted is
correct, and that you have configured your network card correctly.
4) Star Pro Configuration
Telnet to terminal via LAN cable
To telnet go to Start
Go to Run
Type cmd or command
Type telnet 10.0.xx.xx (Where xx is your converted IP from step 1)
Press enter, and you will be prompted for a password. This is blank, so only press enter.
A telnet window should come up with a title Telnet 10.0.xx.xx (Where xx is your converted IP
from step 1)
Enter following parameters
For the W1 Network
savebootparms -pop 0x01310060 -pcr 0x365 -c 0x1ffc -s 27500000 -f 1606630 -o 1 -t -28
