InternetVSAT.com Proprietary
PWR ON indicates the AC power switch is turned on. The AC power switch is
located on the back of the RCST. The AC voltage should be 100 to 240 VAC,
60/50 Hz, 2.0/1.0 Amps.
ALM ON indicates the RAM used by the firmware to implement the two extra PIDs
has failed a critical test for software version 1.0.8. The unit must be returned to
the factory for repair before it will operate with 1.0.8.
ODU ON indicates the RCST is supplying voltage to ODU, and is locked to the satellite.
.
SAT OFF indicates no receive synchronization.
BLINKING indicates receive synchronization.
ON indicates receive and transmit synchronization.
StarPro1 Modulator and Demodulator Table
Modulator
Output
Demodulator
Input
GCU
N/A
35 to 75 dBm
RCST
18 to 30 dBm
in .125 dBm
steps
30 to 70 dBm
