International Trucks ProStar+ Eagle Series. Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 263

International Trucks ProStar+ Eagle Series. Скачать руководство пользователя страница 86

Controls/Features

Warning Messages

In addition to the Diagnostic Trouble Codes (DTC), the digital
display will display a warning message whenever an Engine
indicator is illuminated. This warning message will be toggled
with the normal DTC as follows:

Yellow Warning indicator: WARN ENGINE message

Red Stop indicator: Stop Engine message

The following chart provides the warning messages that are
displayed along with corresponding instrument panel gauge
cluster indicators.

MaxxForce® Engine

Warning Indicator

Warning Message

Red Stop

Stop Engine

Yellow Warning

Warn Engine

Quadrant 3: Display Messages

Outside Temperature and Compass Displays (Optional)

The optional Outside Temperature and Compass Heading is
displayed in Quadrant 3. Typical displays for Temperature and
Compass Heading are listed in the following table. The display
provides both the outside ambient temperature and the relative
direction of the vehicle within a particular geographical zone.

Vehicle must be moving to acquire an accurate temperature.

Quadrant 3 –
Display Messages

Description

Outside
Temperature and
Compass Heading

Display Format:

Outside Temperature Reading

The Outside Temperature is displayed on the first line of
Quadrant 3 above the Compass Heading.

The temperature

sensor is located near the front bumper. Due to its location,
the sensor readings can be affected by road or engine heat
during idling or prevailing driving conditions (extended slow
movement).

The display will be in °F or °C, depending on the units selected
while in the odometer mode.

74

3878859R2

«
...
84
85
86
87
88
...
»

Содержание ProStar+ Eagle Series.








































































































































































































































































Отзывы:

Нет отзывов