International Trucks ProStar+ Eagle Series. Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 263

International Trucks ProStar+ Eagle Series. Скачать руководство пользователя страница 43

Inspection Guide

4.

Wheel and Lug Nuts: Check for damaged or bent wheel.
Check to see that all lug nuts are present and not loose
(look for rust trails around nuts). Ensure that no cracks
or damage are present at wheel mount holes.

5.

Tire: Check tread depth, tire inflation and note if tread
is evenly worn. Minimum tread depth is 4/32 inch on
steering tires. Look for cuts or other damage to the tread
or sidewalls. See if valve caps and stems are missing,
broken or damaged.

6.

Hub: Check for obvious leaks on outside or inside of
wheel. Verify correct oil level in hub.

7.

Steering Linkage: Inspect connecting links, arms, and
rods for worn, damaged, loose, or missing components.

8.

Brake Chamber and Hoses: Check to see that the brake
chambers are not cracked or damaged, and are securely
mounted.

Check for broken, loose or missing parts.

Check for cracked, worn or frayed hoses, and for secure
couplings.

9.

Slack Adjuster: Check slack adjuster and chamber push
rod travel. When pulled by hand, push rod should not
move more than approximately one inch. Angle between
push rod and adjuster arm should be approximately 90
degrees when brakes are applied.

10. Brake Lining and Drum: With brakes released, check

to see that brake linings (where visible) are not
worn excessively thin [less than 1/4 inch (6mm)] or
contaminated by lubricant.

11. Frame: Check for cracks or bends in frame. Make sure

there are no loose, cracked, bent, broken or missing
crossmembers or crossmember fasteners.

3878859R2

31

«
...
41
42
43
44
45
...
»

Содержание ProStar+ Eagle Series.








































































































































































































































































Отзывы:

Нет отзывов