6060720 Rev. 1.1
7
Step 3: Adding or Changing User Codes.
User codes may be 1 to 6 digits in length
.
The 212iL has to be in programming mode to add or change users
To program:
Enter Programming Mode: 99# (Master code) *
Next enter the user location. (2, 3, 4, …)
Now enter the new code followed by the * key
(Yellow LED flashes rapidly).
Repeat the new code followed by the * key
(Yellow LED will flash slowly).
If the change was successful, the yellow LED will still be flashing slowly. Codes entered in this
fashion will hold the relay time programmed with the master code.
Example:
2 # 6789 * 6789 *
3 # 5378 * 5378 *
4 # 23966 * 23966 *
To exit the programming mode press the * key. Or continue for more programming.
Step 4: Creating a User Code to Latch the Main Relay.
A latching user code is used when the need to have the device that is being controlled by the
212iL activate or deactivate for an indefinite amount of time. This operates much like a light
switch. When you enter a latching user code, the Main relay will activate and stay activated until
the same code or a like latching user code is entered to deactivate the relay.
To program:
Enter Programming Mode: 99# (Master code) *
Next enter the relay time of "00"
Next enter the user location. (2, 3, 4, …)
Now enter the new code followed by the * key
(Yellow LED flashes rapidly).
Repeat the new code followed by the * key
(Yellow LED will flash slowly).
If the change was successful, the yellow LED will still be flashing slowly.
Example:
00 # 12 # 7788 * 7788 *
00 # 55 # 6632 * 6632 *
00 # 93 # 78651 * 78651 *
To exit the programming mode press the * key. Or continue for more programming
Step 5: Changing the 212iL Feedback Options.
The 212iL has two key-press feed back options that you may choose from. One is an audio feed
back. This will activate the on board sounder every time that a key is pressed. The other is a
visual feed back. This will flash the yellow LED on the front of the keypad every time that a key is
pressed. These two options are used to verify that a key has been successfully pressed. Both of
these options may be used together.
Audio Option:
To program:
Enter Programming Mode: 99# (Master code) *
Next press Command number 30 followed by the # key.
Next press "0" for the audio feed back option followed by the # key.
Next press "0" to Disable or "1" to Enable the audio option followed by the # key.
Next press the * key
(Yellow LED flashes rapidly).
Next press the * key
(Yellow LED will flash slowly).
Example: 30 # 0 # 0 # * *
(This will disable the sounder from activating every time a key is pressed).
Содержание 212iL
Страница 1: ...6060720 Rev 1 1 1 212iL...
