Intermec PB51, Руководство пользователя

Страница: 57 / 72

Chapter 3 — Troubleshooting and Maintaining the PB51
PB51 Mobile Label and Receipt Printer User’s Guide 47
Printable characters are printed in black-on-white. Control characters
and space characters (ASCII 000 to 032 dec) are printed in white-on-
black.
As long as a continuous string of characters is bei ng received, the
program wraps the lines until the label is full and then starts to print
another label. After each character transmission, t he following
information prints:
t
Page number
t
Number of characters printed on the label
t
Total number of characters received so far
When you exit Dump mode, a final label prints to in form you that it is
exiting from Dump mode.
Using Dump Mode in IPL
When you enter Dump mode, the printer captures inco ming
characters on the communication ports and prints th em on one or
more labels.
If you have IPL firmware on your printer, you can a ccess Dump mode
in two different ways with slightly different resul ts:
t
You can access Dump mode through Test mode or Exten ded Test
mode and you will receive printouts that look exactly like those
produced with the Line Analyzer program in Fingerpr int. For
more information, see the previous procedure,
“Using the Line
Analyzer in Fingerprint” on page 46 .
t
You can access Dump mode using the control panel buttons. If
you access Dump mode this way, characters are printed on a
continuous line along with corresponding hexadecimal numbers.
To enter Dump mode using the control panel buttons
t
Press and hold the
Feed
and
Standby
buttons until the printer
starts feeding out media.
The printer feeds out several labels (or inches of media), prints the test
labels, and then enters Dump mode.
To exit Dump mode using the control panel buttons
t
Press the Feed button.