Intermec MobileLAN 21 Series, Системное руководство

Страница: 50 / 275

MobileLAN access 21XX System Manual
2-10
To connect to the Ethernet network
•
Attach one end of the Ethernet cable to the 10BaseT/100BaseTx port on the 2100
and attach the other end to your Ethernet network.
Connecting to Power
You can either use a power cord to connect the 2100 directly to a power outlet or you
can order a 2100 with the power over Ethernet option. This option lets you power the
2100 through its Ethernet cable that is connected to a MobileLAN power bridge and the
Intermec Power Hub. For help, see the documentation that shipped with your
MobileLAN power bridge.
To connect the 2100 to power
•
Plug one end of the power cord into the power port on the 2100 and plug the other
end into an AC power outlet. The access point boots as soon as you apply power.
Installing the 2102/2106
You can install the 2102 or the 2106 horizontally on a desk or counter, or you can install
it vertically to a wall using the wall bracket that ships with it.
An optional cubicle bracket is also available for mounting the 2102 or the 2106 on a
cubicle wall. These optional mounting bracket kits and accessories are available for the
2102 or the 2106:
•
Cubicle bracket kit (Part No. 070366)
•
Power supply holder kit (Part No. 069893)
This optional mounting bracket kit is available for the 2102:
•
Dual antenna bracket kit (Part No. 069888)
Contact your Intermec representative for more information about ordering access point
accessories.
To install the 2102 or 2106
1. Mount the 2102 or 2106.
2. Position or install the antenna.
3. Connect the 2102 or 2106 to your wired LAN (unless you are using it as a WAP).
4. Connect the 2102 or 2106 to power.
These steps are explained in detail in the next sections. When you are done, you need to
configure the 2102 or 2106 so it can communicate with your network.