manualshive.com logo in svg

Intermec EasyLan 100, Руководство пользователя

Поделиться
Скачать
Intermec EasyLan 100 Скачать руководство пользователя страница 70

0100 Access Point User’s Manual

B-8

RF Port Priority and Ethernet Port Priority

These parameters are used in the spanning tree algorithm to determine the
place of the port in the tree as well as to resolve loop contention problems. The
lower value has the higher priority. You can set this parameter for both the RF
port and the Ethernet port.

These parameters range from 0 to 255, with default values of 128.

RF Port Enabled and Ethernet Port Enabled

If either port is disabled, the Access Point will not forward data packets to the
network through this port. Since there are only two ports on the Access Point,
disabling either port would make the entire bridge inactive.

RF Port Path Cost and Ethernet Port Path Cost

These parameters specify the cost that is added to the spanning tree for this
port of the Access Point. This cost applies only when the Access Point is not the
root of the tree and when the port you are setting is the root port of the two
Access Point ports.

The parameter range is 1 to 65535, with a default value of 100 for the Ethernet
port and 625 for the RF port.

Содержание EasyLan 100

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды