Intermec EasyLan 100 Скачать руководство пользователя страница 43

Страница: 43 / 88

3-13

Configuring the Access Point

This is for the illustrations

Configuring the Radio Parameters

For more information on radio parameters, refer to Appendix B,
“Understanding the Radio Parameters.”

To fill in the 2.4 GHz RF Configuration dialog box

1. From the configuration dialog box, choose Configure 2.4 GHz RF. The 2.4

GHz RF Configuration dialog box appears.

2. Click the down arrow in the right side of the Station Type field. A

dropdown list box appears.

3. From the list box, select the Station Type: Master, Alternate Master, Station.

If you selected Station, skip to Step 6.

4. In the Channel field, enter the channel through which the master

communicates with its stations.

5. If you have more than 15 masters in the Subchannel field, enter the

subchannel through which the master communicates with its stations.

6. In the Domain field, enter the domain of the subnetwork through which all

masters and stations in the network will communicate.

7. In the Master Name field, if you selected the station type to be Master or

Alternate Master, enter an alias name.

8. Choose OK to exit this dialog box and return to the configuration dialog

box.

9. Cycle power on the Access Point, or press the reset button on the front

panel of the Access Point for your changes to take effect.

Содержание EasyLan 100

























































































Результаты поиска

Содержание EasyLan 100

Отзывы:

Бренды по названию

Популярные бренды

Intermec EasyLan 100, Руководство пользователя

Результаты поиска

Содержание EasyLan 100

Отзывы:

Бренды по названию

Популярные бренды