Intermec EasyLan 100, Руководство пользователя

Страница: 69 / 88

B-7
Appendix B
B
Bridge Max Age
When the Access Point acts as the root, it uses this parameter to determine the
maximum amount of time before discarding hello packet data for all bridges on
the network.
This parameter is specified in seconds between 6 and 40, with a default value of
20.
Bridge Hello Timer
When the Access Point acts as the root, it uses this parameter to determine the
interval of time between hello packets. If this parameter is set too high, the
network will not quickly resolve contention problems. However, if the
parameter is set too low, the network will be crowded with hello packet traffic.
This parameter is specified in seconds between 1 and 10, with a default value of
2.
Bridge Forward Delay
This parameter specifies the amount of time it takes to transition between port
states after reset of the Access Point. The state transitions are as follows:
• disabled
• blocking incoming packets
• listening for other bridges
• learning the addresses of other bridges
• forwarding data
This parameter is specified in seconds between 4 and 30, with a default value of
15.
Aging Time
This parameter specifies the time after which the learned physical address of
the network node is discarded. This data is dynamically acquired by the Access
Point so that it can forward packets properly.
This parameter is specified in seconds between 10 and 1,000,000, with a default
value of 300.