Intermec EasyLan 100, Руководство пользователя

Страница: 41 / 88

3-11
Configuring the Access Point
3
This is for the illustrations
Adding a New Remote Access Point
1. From the main menu, choose Add.
The Add Access Point dialog box appears.
2. Enter a name for the Access Point.
3. Assign an IP Address to the new Access Point.
If your network does not carry IP traffic and you do not have another
Access Point, use the default setting of 192.0.1.1.
If you do not want to assign an IP addresss or if you do not know the IP
address, you can use a BOOTP server. Enter the Internet address into the
BOOTP server.
4. Enter the Physical Address for the new Access Point. The physical address
is written on a label that is on the rear panel of the Access Point.
5. Choose OK.
6. Cycle power on the Access Point, or press the reset button on the front
panel of the Access Point for your changes to take effect.
7. If you need to configure the new Access Point, follow the instructions in the
next section, “Editing a Remote Access Point.”