Intermec EasyCoder PD4 Скачать руководство пользователя страница 130

Страница: 130 / 162

124

ESim v5.12 for EasyCoder PD4—Programmer’s Reference Manual

Chapter —Commands

^@ – Reset Printer

Description

This command resets the printer.

Syntax

Remarks

The

command resets the printer in the same way as a power

off followed by a power on.

• The command must be followed by CR/LF to be correctly

interpreted.

• The reset command is only available during command input,

that is, not as data in PCX-graphics, soft fonts, or in format

forms.

• The printer will be unavailable for a short time during which

all commands sent to the printer will be lost.

Note:

An error report has higher priority than other commands

and is processed directly, both in position of normal command-

input and in position of any error recovery.

command cannot be performed anywhere else, such as

• during downloading of images, fonts, or forms, or

• inside a variable-input (?) or inside a string-area (""), or

• when the input data buffer is full (> 8000 bytes).

Example

↵

:Printer will be reset.

Содержание EasyCoder PD4



































































































































































Результаты поиска

Содержание EasyCoder PD4

Отзывы:

Похожие инструкции для EasyCoder PD4

Бренды по названию

Популярные бренды

Intermec EasyCoder PD4, Руководство программиста

Результаты поиска

Содержание EasyCoder PD4

Отзывы:

Похожие инструкции для EasyCoder PD4

Бренды по названию

Популярные бренды