Intermec EasyCoder 4100, Руководство пользователя

Страница: 54 / 282

2-8
4100 Bar Code Label Printer User's Manual
Helvitica condensed 9 pt italic
Co d e 39 18 p t
Configuring the Serial Port
The 4100 printer’s serial port settings should match those of your host
computer or network controlling device. If you need to change the default
settings, refer to the following tables. Use a small screwdriver or other
suitable tool to move the DIP switches to the desired settings. The switches
should click securely into the 1 (ON) or 0 (OFF) positions. The printer must
then be turned off and on for the new switch settings to take effect.
Serial Port Settings
The following table summarizes your choices for the printer serial port
settings.
Parameter Settings Description
Baud Rate 110, 300, 600, 1200, 2400, 4800,
9600, 19200 The rate, in bits per second, at which the host exchanges
data with the printer.
Data Bits 7 or 8 The number of bits that represent the ASCII characters.
Parity Odd, Even, None Checks each transmitted character for errors.
Stop Bits 1 or 2 Bits that follow each character to synchronize character
transmission.
Protocol Standard, XON/XOFF,
Multi-Drop, Polling Mode D The type of network used to connect the printer, the host,
and the rest of the data collection system.
Device Address A to Z, 0 to 5 Unique address for each device connected with
Multi-Drop protocol.
Test and Service Enabled or Disabled Provides printer diagnostics to the host and prints test
labels.
Self-Strip Enabled or Disabled Peels the media backing away from labels one at a time
for on-demand printing.