Intermec EasyCoder 4100, Руководство пользователя

Страница: 137 / 282

6-5
6
Fr Goth
Designing Labels and Using Commands
Helvitica condensed 9 pt italic
Co d e 39 18 p t
Format
<STX>
Mark the beginning of this message line.
<ESC>c
Select 8636/46 emulation mode.
<ETX>
Mark the end of this message line.
<ESC>P
Enter programming mode.
E4;F4;
Erases anything previously stored as format 4 and accesses the
location for format 4.
H0
Define field 0 as a human-readable field.
o120,50
Set the origin of field 0 at coordinates 120,50.
f0
Do not rotate the field.
c2
Determines that field 0 will print in font 2.
h2
Set the height for field 0 to two times actual size.
w1
Set the height for field 0 to actual size.
d0,30
Specify that the data for field 0 will be entered in Print mode and
that the data will be a maximum of 30 characters long.
B1
Define field 1 as a bar code field.
o170,220
Set the origin of field 1 at coordinates 170,220.
c0,1
Select Code 39, the printer enters a check digit.
h50
Set the height for field 1 to 50 dots.
w1
Set the width for field 1 to actual size.
i0
No human-readable interpretive field will print below the bar code.
d0,11
Specify that the data for field 1 will be entered in Print mode and
that the data will be a maximum of 11 characters long.
p@
The bar code will not have a prefix.
R
Exit Programming mode and enter Print mode.
Data
<ESC>E4
Accesses format 4 from the printer‘s memory
<CAN>
Clears all host-entered data for the current format and sets the field
pointer to the lowest field.
THIS IS A SAMPLE LABEL
This is the data for the first field.
<CR>
Instructs the printer to go to the next data entry field.
SAMPLE
This is the data for this field.
<ETB>
Tells the printer to print the label.